Tap:
Style: HydroTap Classic Plus CS
240V CS Command Center:
Water Pressure: Min 37psi - Max 100psi (2.60 – 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
- Style: HydroTap Classic Plus CS
- Hole Size: 1 \u215c"
- Available Finishes: Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel and Gunmetal
- Installation: Over sink as a secondary tap or on optional font/drip tray
- Flow Rate Max: Max 1.8 gpm / 6.81 lpm
- Sparkling Water Flow Rate: 0.4 gpm / 1.51 lpm
- Water Pressure: Min 37psi - Max 100psi (2.60 - 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
- Water Connection: 1 x 1/2" BSP - isolation valve is required within 3′ / 0.9m of the installation
- Integral Water Valves: HydroTaps are fitted with a Dual check valve and a 50psi Pressure Limiting Valve
- Water Supply Requirements: Potable drinking water supply
- Optimal Total Dissolved Solids (TDS) Range: TDS Min 50ppm - Max 150ppm
- Integral Water Filter: 0.2 micron, 1.5 size - replace every 1,800 gallons / 6,813 liters (~6 months for a large office)
- Power Rating: 220-240V, 50-60Hz, 15 amp power supply with a NEMA 6-15 outlet
- Dimensions (WxDxH): 11" x 18.9" x 13.1" / 280mm x 480mm x 333mm
- Minimum Air Gap: Clearances are required - 2" / 50mm Left side, 2" / 50mm Right side , 8" / 200mm above
- Dry Weight: 80.5lbs / 36.5kg
- Product Approvals: IAPMO - NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1023, ASSE 1087; cUL; CEC
- Warranty: 2 years
|
| Style |
HydroTap Classic Plus CS |
| Hole Size |
1 \u215c" |
| Available Finishes |
Chrome, Brushed Chrome, Matte Black, Brushed Gold, Brushed Nickel and Gunmetal |
| Installation |
Over sink as a secondary tap or on optional font/drip tray |
| Flow Rate Max |
Max 1.8 gpm / 6.81 lpm |
| Sparkling Water Flow Rate |
0.4 gpm / 1.51 lpm |
|
| Water Pressure |
Min 37psi - Max 100psi (2.60 - 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm) |
| Water Connection |
1 x 1/2" BSP - isolation valve is required within 3′ / 0.9m of the installation |
| Integral Water Valves |
HydroTaps are fitted with a Dual check valve and a 50psi Pressure Limiting Valve |
| Water Supply Requirements |
Potable drinking water supply |
| Optimal Total Dissolved Solids (TDS) Range |
TDS Min 50ppm - Max 150ppm |
| Integral Water Filter |
0.2 micron, 1.5 size - replace every 1,800 gallons / 6,813 liters (~6 months for a large office) |
| Power Rating |
220-240V, 50-60Hz, 15 amp power supply with a NEMA 6-15 outlet |
| Dimensions (WxDxH) |
11" x 18.9" x 13.1" / 280mm x 480mm x 333mm |
| Minimum Air Gap |
Clearances are required - 2" / 50mm Left side, 2" / 50mm Right side , 8" / 200mm above |
| Dry Weight |
80.5lbs / 36.5kg |
| Product Approvals |
IAPMO - NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1023, ASSE 1087; cUL; CEC |
| Warranty |
2 years |
-
-
Type:
Water Dispensers / Water Filtering Units
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.
Extended warranties are usually very inexpensive and can save you thousands in the future.
Some can even cover extra costs that result, such as cost of food that spoils when your fridge dies.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
Appliances
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
appliances
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.
